Ham Radio CAT, PSK31, FT8, JT9 and JT65 Interfaces - Xiegu

Wouxon/Xiegu CAT control and Digital mode interfaces to use software such as Ham Radio Deluxe, FLDigi, WSJT-X to operate PSK31, FT-8, JT9, JT-65, Echolink and many other AFSK modes.

We offer a range of interfaces to ensure maximum compatibility with modern and older PCs and digimode software. You can also choose to use your PCs internal sound card to generate/decode your Digimode signals or to use an external sound card interface to free up your PCs sound card for normal use. We use icons shown below to guide you to the best choice for your equipment setup.

	Suitable for any AFSK and Digital mode such as FT8, JT9, PSK31, WSPR ect. Perfect for use with WSJT-X, FlDigi, Ham Radio Deluxe (DM780), Echolink and many others. Please note that some of these applications offer enhanced functionality when you also have CAT control of the radio.
	The interface has a built in external USB Sound Card based on C-Media CM108 chip. This frees up your PCs internal sound card for normal windows functions. The interface has a built in PTT function and can be used without a CAT interface.
	The interface gives you CAT control of your transceiver via a built in USB Comm port. CAT control allows you to set/get the frequency and mode of your transceiver. The interface used the highly reliable FTDI UART comm port chipset.
	The interface gives you CAT control of your transceiver using "older" PCs legacy RS232 comm port. Also suitable if you use a USB to RS232 adapter. CAT control allows you to set/get the frequency and mode of your transceiver.

Digimode-4-Xiegu $100.00

* Icom version shown in picture

USB CAT Control and Audio Interfacing of your Xiegu Transceiver allowing you to fully utilise software such as WSJT-X, FLDigi, Ham Radio Deluxe, Echolink, PSK31, DM780, N1MM Logger, MixW and many more.

Our Latest Digimode-4 interface provides a single USB connection to your PC and has both built-in USB CAT control and its own built-in USB Sound Card. The interface allows you to dedicate your digital mode working to the external sound card and its independent level setting controls leaving your PCs internal card for normal Windows functions.

This interface is fully wired for your PC and transceiver. Just follow the provided instructions to download the FTDI drivers. The in-built sound card drivers are included in your operating system and the interface will pop up as a generic USB PnP Sound Device. The interface plugs into a free USB port on your PC and to your transceiver CAT and Data/PKT ports. PTT keying is via the interfaces built-in USB comm port RTS signal or you can choose to PTT over the CAT commands if your transceiver supports this.

The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated.

With this interface, you will be up and running on FT8, PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires CAT control and Tx/Rx Audio Interfacing between your PC and Radio within minutes.

Cable length is 1.5m from the USB port on your PC to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.

The Digimode-4 PDF instruction manual is here:
http://www.xggcomms.com/userimages/USB-Digimode-4.pdf

Use the Drop-Down menu below to select your radio type.

Option 1
Xiegu X5105

Option 2
Xiegu G90, G106

Add Tracked Shipping

If you wish to upgrade to tracked shipping on your item then you can choose to add it to your Shopping Cart here. You just need to add it once and the cost is $5. If you are in the USA, do not add this option. We already use a tracked USPS shipment to The USA.

Digimode-1-Xiegu $70.00

USB CAT Control and Audio Interfacing of your Xiegu X5105 and G90 Transceiver allowing you to fully utilise software such as WSJT-X, FLDigi, Ham Radio Deluxe, Echolink, PSK31, DM780, N1MM Logger, MixW and many more.

Complete plug-and-play solution. The interface is full wired for your PC and transceiver. Just follow the instructions to download the FTDI drviers, configure up your CAT/Digimode software and you are up and running. The interface plugs into a free USB port on your PC to provide the CAT and PTT keying and to your PCs own Sound Card. At the radio end, it plugs into the CAT and Data ports.

The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated. The USB section of the interface uses the highly reliable FTDI Chipset and provides a virtual comm port allowing full CAT control and hardare PTT keying over the RTS signal.

With this interface, you will be up and running on FT8, PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires CAT control and Tx/Rx Audio Interfacing between your PC Soundcard and Radio within minutes.

Cable length is 1.5m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.

Fully isolated audio interfacing of your transceiver allowing you to fully utilise software such as Ham Radio Deluxe (DM780), WSJT-X, FLDigi allowing you to operate many digital modes such as PSK31, FT8, JT9, JT65 and Echolink.

Complete plug-and-play solution. The interface is fully wired for your PC and transceiver. Just follow the instructions to download the FTDI drivers, configure up your Digimode software and you are up and running in no time. The interface utilises a free USB port on your PC to provide a comm port to allow for PTT keying via the RTS signal. The interface plugs into your PCs own sound card. At the radio side, the interface plugs into the Data socket for Tx/Rx audio and PTT.

The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated. The USB section of the interface uses the highly reliable FTDI Chipset and provides a virtual comm port allowing hardare PTT keying over the RTS signal.

Cable length is 1.5m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.5m. The box is very small at 40x35x20mm making it ideal to hide away behind the PC or transceiver using no desk space.

Note: Check your X108G has the 6 pin mini Din accessory socket. This interface is only compatible with the X108G with the 6 pin mini Din. Some X108G's may have an 8 pin socket fitted and this interface will not fit these radios.

External USB Sound Card isolated audio interface allowing you to operate many AFSK digital modes such as PSK31, FT8, JT9, JT65 and Echolink. Fully plug and play. Simply plug the USB cable into your PC and the Data plug into your transceiver.

Perfect with digital mode applications such as DM780, WSJT-X, FLDigi, Echolink etc.

The interface is fully galvanically isolated and uses the C-Media CM108 USB Audio Chipset. Most modern operating systems already have the CM108 driver pre-installed. The advantage of this interface is your PCs normal soundcard is not tied up for Digital mode operations. As you now have a separate and dedicated soundcard for your Digital Mode working, you can independently set the Tx/Rx audio levels leaving normal PC sound unaffected. This interface does include a VOX PTT but see the note regarding the X5105 and G90 below.

READ ME - PTT operation. For use with the X5105 and G90 transceivers the PTT needs to be actuated via the CAT commands. For this, you will need a separate USB CAT interface. If you do not have one, have a look at our USB CAT Interface Xiegu-Cable-1-USB product (in the shop below) which will work alongside this interface. The Xiegu X108G, the PTT can be keyed via the interface built-in Vox circuit.

Xiegu USB CAT Interface Cable using the highly reliable FTDI Chipset. This interface allows you to use CAT control software and utilise the full feature set of Fldigi, WSJT-X, Ham Radio Deluxe and many others with your transceiver. It also allows you to correctly PTT Key the radio when operaing digital modes. The X5105 and G90 emulate the Icom IC-7000 CAT protocol.

On the X5105, the interface is fitted with the recessed 3.5mm jack. Select your Xiegu transceiver type from the Option list below