Before you purchase one of my Icom CI-V or Yaesu CAT Ham Radio Interfaces, you are going to need some Amateur Radio software to get the most out of it. This page has links to various sites where you can download free ham radio software or shareware applications. These range from simple rig control right up to full logging software and digimode communications such as PSK31. My interfaces are 100% Compatible with Ham Radio Delux, MixW, TRX-Manager, N1MM, FTBCat and many more that allow you to raise the DTR Signal to provide interface power.

Ham Radio Software Links Page


 
(XGGCOMMS.COM Cat Interface for Icom Tranceivers and Receivers shown above)

Looking For Ham Radio Remote Control Software?, see links below.Choose an XGGCOMMS.COM CAT Interface. They are the best value and have the best proven performance on The Web. Available for both Icom and Yaesu Tranceivers, they are CT17, FIF232C and CT62 Compatible and come with options such as Hardware PTT Keying and extra cable lengths.

 

Popular Radio Control Software

Ham Radio Deluxe (Freeware)
Ham Radio Deluxe (HRD) is a suite of Windows programs providing CAT control for commonly used transceivers and receivers. HRD also includes mapping and PSK31 software.

MixW (Freeware)
MixW is a multi mode multi functional software for every day logging and Contests. It has many useful features that make your QSO logging process almost a 100% automatic procedure.MixW for digital modes may be used without TNC. The only requirements are a computer running Windows 9x, ME, NT4, 2000, XP or Vista operating system with compatible soundcard and one of the RigExpert USB interfaces.

TRX-Manager (30 day free demo and then 70 Euros to buy on CD)
TRX-Manager features a logging module (and all real-time DXCC functions) but its purpose is not to compete with some excellent logging program. It does not attempt either to merely mimic the front panel of your transceiver : a good program must add capabilities to the rig. TRX-Manager uses almost all CAT commands not only to provide remote control, but also to add capabilities such as bands scope, short-wave database, DX Spotting, memory channels management with offset, scanning, CTCSS, mode and filter control or to give you additional real-time features that do not exist on your transceiver. A lot of functions are original

N1MM (Freeware)
The N1MM Logger is a freeware program designed to do contest logging and some general logging. It is not a general logging program with award tracking etc. but is mainly a contest logging program.

FTBCAT (Freeware)
A CAT control program for Yaesu FT-100/D, FT-817/ND, FT-847, FT-857/D, FT-897/D, FT-920, FT-1000MP Mark V transceivers and VR-5000 and FRG-100 receivers.

Commander (Freeware)
A free application that controls up to 4 Icom, TenTec, Kenwood, Yaesu, Elecraft, FlexRadio, Alinco, or Kachina transceivers, switching between them manually or automatically based on frequency, and displaying frequency-dependent settings for devices like tuners and amplifiers; includes a bandspread and transverter support.


SuperControl (75 Euros)
Full transceiver control via buttons in the software. Frequency and mode will be polled automatically from the transceiver. So a normal tuning on the transceiver itself will be detected and shown in the software vfo's.

Logger32 (Freeware)
Logger32 has been developed to be a highly user configurable general purpose Amateur Radio logbook with computer control support for many radios and antenna rotators.


 

Other sources of software

DXZone 
Radio control software, for swl and ham radio operators

AC6V
A huge compilation of Ham software