Icom CAT Interface - Yaesu CAT Interface - Yaesu CAT & Cloning Interfaces

Yaesu CAT Interfaces (CT-62 and FIF-232C Equivalent), Yaesu Cloning Interfaces, Yaesu CAT Cables for the FT-100, FT-817, FT-857, FT-897 and Many More. All Interfaces come with a full 12 month warrantee against material failure and a 30 day no quibble satisfaction guarantee. If you are not happy with your purchase for any reason, send it back within 30 days for full refund. See my Terms and Conditions page for details.

Yaesu CAT Interface Key Features

Control/Program your Yaesu Radio from your PC or Laptop.
Full software compatibility with Ham Radio Deluxe, Logger32, MixW, TRX-Manager, SuperControl and dozens of others that allow you to provide power via the RS232 port. (See Software Links Page)
Works in conjunction with Signalink and RIGBlaster interfaces where they offer no CI-V control of your transceiver
Proven Superior Performance to competing designs. The interface produces no measurable signal noise and works at the highest baud rates that the radio's support. (See Interface Performance Page or click on picture below)

Click on Image to Check Performance Data
Both USB and RS232 versions of many interfaces available. The RS232 versions are powered from your PC's RS-232 port and so requires no additional PSU. For the RS232 version, you must ensure that your chosen software can raise the RS232 "DTR" signal to provide the interface with power. The main software packages listed above have this facility and work 100% with my products.
RS232 versions work perfectly when used with a USB to RS232 converter when your PC has no legacy RS232 port.
USB Versions us the excellent FTDI chipset for maximum reliability
Designed to protect your Radio and PC from damage
Requires no additional Drivers for your PC. True plug and play
Downloadable set-up instructions for each interface

Interface model:

Yaesu FT-Cable-1

RS-232 to 8 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-100, FT-817, FT-857 and FT-897

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $29.99 (2m long version)

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

3m Version $31.99
Free Shipping !!

Interface model:

Yaesu FT-Cable-1-USB

USB to 8 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-100, FT-817, FT-857 and FT-897

The standard cable length is 1.8m

Price $29.99

Download Instruction Sheet for this interface

Interface uses the excellent
FTDI Chipset

Yaesu CAT and Audio Interface Kit

Interface model:
Yaesu FT-Cable-1 Kit

Complete solution for PSK-31, SSTV, RTTY, WEFAX, PACTOR and any AFSK mode that requires full CAT and Audio Interfacing between your PC and Transceiver

This cable kit consits of an FT-Cable-1 CAT interface and an audio harness between your PC soundcard and tranceiver Data jack.

Compatible with the following Yaesu Equipment:

FT-100, FT-817, FT-857, FT-897

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $39.99 (2m long version)

Download Instruction Sheet for this interface

2m Version $39.99
Free Shipping !!

2m cable not long enough? Use the 3m, 4m and 5m options below

Yaesu USB CAT and Audio Interface Kit

Interface model:

Yaesu FT-Cable-1-Kit-USB

Complete solution for PSK-31, SSTV, RTTY, WEFAX, PACTOR and any AFSK mode that requires full CAT and Audio Interfacing between your PC and Transceiver

This cable kit consits of an FT-Cable-1 USB CAT interface and an audio harness between your PC soundcard and tranceiver Data jack.

Compatible with the following Yaesu Equipment:

FT-100, FT-817, FT-857, FT-897

The standard cable length is 1.8m

Price $39.99

Download Instruction Sheet for this interface

Interface uses the excellent
FTDI Chipset

Interface model:

Yaesu FT-Cable-2

RS-232 to 6 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-757GX2, FT-840, FT-890, FT-900

This interface also has the hardware PTT facility enabled.

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

The standard cable length is 2m

Price from $29.99 (2m long version)

Download Instruction Sheet for this interface

2m Version $29.99
Free Shipping !!

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:

Yaesu FT-Cable-2-USB

USB to 6 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-757GX2, FT-840, FT-890, FT-900

The standard cable length is 1.8m.

Price $29.99

Download Instruction Sheet for this interface

Interface uses the excellent
FTDI Chipset

Interface model:

Yaesu FT-Cable-3

RS-232 to 6 Pin Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:
FT-736, FT-747, FT-767GX, FT-980, FT-990*, FT-1000*, FT-1000D*, FRG-100, FRG-8800, FRG-9600

(Contact me before buying an interface for a radio marked with an asterix * as you require the correct firmware in your radio.)

This interface also has the hardware PTT facility enabled.

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

The standard cable length is 2m

Price from $29.99 (2m long version)

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:

Yaesu FT-Cable-3-USB

USB to 6 Pin Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-736, FT-747, FT-767GX, FT-980, FT-990*, FT-1000*, FT-1000D*, FRG-100, FRG-8800, FRG-9600

(Contact me before buying an interface for a radio marked with an asterix * as you require the correct firmware in your radio.)

The standard cable length is 1.8m.

Price $29.99

Download Instruction Sheet for this interface

Interface uses the excellent
FTDI Chipset

Interface model:

Yaesu FT-Cable-4

RS-232 to 6 Pin Mini Din CAT Jack to provide full Cloning compatibility with the following Yaesu Equipment:

FT-1802 *, FT-2800 *, FT-7800, FT-8100, FT-8800, FT-8900

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $29.99 (2m long version)

Note: The FT-1802 and FT-2800 clone via the RJ-12 Mic jack. The Interface will be provided with a 6 pin mini Din connector and you will need to adapt to the RJ-45 for these radios.

I thoroughly recommend G4HFQ's memory management software for the radio's above.

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:

Yaesu FT-Cable-5

RS-232 9 Pin to RS-232 9 Pin to allow full CAT compatibility with the following Yaesu Equipment:

FT-450, FT-847, FT-920, FT-950, FT-1000MP, FT-1000 Mk5 Field, FT-2000, FT-DX9000 and VR-5000

The standard cable length is 2m. Longer lengths are available charged at $2 per extra meter. Contact me me if you do require a longer cable.

Price $20.99 for 2m cable

Download Instruction Sheet for this interface

Choose the correct interface for your Transceiver

Interface model:

Yaesu FT-Cable-6

RS-232 to 3.5mm Pin Stereo Jack to provide full Programming and Cloning compatibility with the following Yaesu Equipment:

FT-60, VX-3R, VX-5R, VX-6R, VX-7R, VX-150, VX-170, VX-177

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $30.99 (2m long version)

Note: This interface is terminated in a 3.5mm stereo jack. (Data to the ring). It is not recommended that this is plugged into the transceiver.
You will need to provide a 3.5mm to 2.5mm stereo jack adapter and then use the Yaesu CT-91 or CT-44 Microphone adapters to interface to the unique Yaesu 3.5mm 4 pole jack on the transceiver. The clone signal is carried on the ring of the 2.5mm stereo jack socket on the Mic inputs of the CT-91 and CT-44.

I thoroughly recommend G4HFQ's memory management software for the radio's above.

If you have any questions regarding connection, E-mail me.

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:

Yaesu FT-Cable-7

Yaesu PSK31 and Digimode cable to connect the transceiver Data connector to your PC's soundcard. Perfect for any AFSK digital modes such as PSK31, RTTY,Pactor, Packet, SSTV, Modulated CW.
Compatible with the folowing radio's:

FT-100*, FT-817*, FT-857, FT897, FT-450 and FT-950.

*Note that the FT-100 and FT-817 do not have vox operation via the Data socket. You will need to use this cable in conjuntion with the FT-Cable-1 CAT Interface to allow PTT keying. You can buy the FT-Cable-1 and FT-Cable-7 as a complete package called the FT-Cable-1 Kit. See above.

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $19.99 (2m long version)

If you have any questions regarding connection, please E-mail me.

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

CW Interface

Interface models:

CW-Cable-1 and CW-Cable-2

This interface offers CW Keying of your Transceiver via your PC's RS-232 port and your Radio's CW/Key Jack. The interface requires your software to be able to send CW via the RS-232 "RTS" Signal.

The CW keying circuit is housed in the 9 Pin D-Type RS-232 shell and the 2m long cable is terminated in a 3.5mm mono jack.

Most CW keyer jacks are 1/4" and so you need to either provide a 3.5mm to 1/4" adapter or purchase the 1/4" jack version of the interface for a small extra charge.

CW-Cable-1 has a 3.5mm jack
CW-Cable-2 has a 1/4" jack

Price from $22.99 (2m long version)

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface Performance Tests

My CAT Interfaces have been fully tested to ensure that they do not generate unwanted noise in your reciever and that they operate reliably at the highest baud rates supported by the tranceivers/receivers. Click on the image below to be directed to my interface performance page.

Click on the picture below to go to the interface performance page

Website Search