Icom CAT Interface - Yaesu CAT Interface - Yaesu CAT CT62 FIF-232 Shop

Yaesu CAT Interfaces (CT-62 and FIF-232C Equivalent), Yaesu Cloning Interfaces and Yaesu CAT Cables for the FT-100, FT-817, FT-857, FT-897 and Many More. All Interfaces come with a full 12 month warrantee against material failure and a 30 day no quibble satisfaction guarantee. If you are not happy with your purchase for any reason, send it back within 30 days for full refund. See my Terms and Conditions page for details.

Yaesu CAT Interface Key Features

Control/Program your Yaesu Radio from your PC or Laptop.
6 Types of CAT and Cloning Interface available for a large range of Yaesu Equipment
Full software compatibility with Ham Radio Deluxe, Logger32, MixW, TRX-Manager, SuperControl and dozens of others that allow you to provide power via the RS232 port. (See Software Links Page)
Works in conjunction with Signalink and RIGBlaster interfaces where they offer no CI-V control of your transceiver
Proven Superior Performance to competing designs. The interface produces no measurable signal noise and works at the highest baud rates that the radio's support. (See Interface Performance Page or click on picture below)

Click on Image to Check Performance Data
Standard Cable Length is 2m but extra cable lengths up to 5m available
Connects between your PC's 9 Pin RS232 Port and the CAT Jack on suitably equipped Yaesu Radios. For Yaesu Radio's which do not include PTT keying in the CAT Command set, the interface is hardware PTT enabled via the PTT line in the CAT jack.
Powered from your PC's RS-232 port and so requires no additional PSU.
Works perfectly when used with a USB to RS232 converter when your PC has no legacy RS232 port.
Designed to protect your Radio and PC from damage
Requires no additional Drivers for your PC. True plug and play
Supplied with full Instructions to get you up and running with the minimum of fuss

Yaesu CAT and Cloning Interfaces

Interface model:
Yaesu FT-Cable-1

RS-232 to 8 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-100, FT-817, FT-857 and FT-897

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $27.99 (2m long version)

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:
Yaesu FT-Cable-2

RS-232 to 6 Pin Mini Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-757GX2, FT-840, FT-890, FT-900

This interface also has the hardware PTT facility enabled.

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $29.99 (2m long version)

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:
Yaesu FT-Cable-3

RS-232 to 6 Pin Din CAT Jack to provide full CAT compatibility with the following Yaesu Equipment:

FT-736, FT-747, FT-767, FT-980, FT-990*, FT-1000*,
FT-1000D*, FRG-100, FRG-8800, FRG-9600

(Contact me before buying an interface for a radio marked with an asterix * as you require the correct firmware in your radio.)

This interface also has the hardware PTT facility enabled.

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $29.99 (2m long version)

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:
Yaesu FT-Cable-4

RS-232 to 6 Pin Mini Din CAT Jack to provide full Cloning compatibility with the following Yaesu Equipment:

FT-1802 *, FT-2800 *, FT-7800, FT-8100, FT-8800, FT-8900

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $27.99 (2m long version)

Note: The FT-1802 and FT-2800 clone via the RJ-12 Mic jack. The Interface will be provided with a 6 pin mini Din connector and you will need to adapt to the RJ-45 for these radios.

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface model:
Yaesu FT-Cable-5

RS-232 9 Pin to RS-232 9 Pin to allow full CAT compatibility with the following Yaesu Equipment:

FT-847, FT-920, FT-1000MP, FT-1000 Mk5 Field,
FT-2000 and VR-5000

The standard cable length is 2m. Longer lengths are available charged at $2 per extra meter. Contact me me if you do require a longer cable.

Price $20.99 for 2m cable

Download Instruction Sheet for this interface

Choose the correct interface for your Transceiver

Interface model:
Yaesu FT-Cable-6

RS-232 to 3.5mm Pin Stereo Jack to provide full Programming and Cloning compatibility with the following Yaesu Equipment:

FT-60, VX-3R, VX-5R, VX-6R, VX-7R, VX-150, VX-170, VX-177

The standard cable length is 2m but you can select cables up to 5m long by using the "Buy Now" buttons below.

Price from $30.99 (2m long version)

Note: This interface is terminated in a 3.5mm stereo jack. (Data to the ring). It is not recommended that this is plugged into the transceiver.
You will need to provide a 3.5mm to 2.5mm stereo jack adapter and then use the Yaesu CT-91 or CT-44 Microphone adapters to interface to the unique Yaesu 3.5mm 4 pole jack on the transceiver. The clone signal is carried on the ring of the 2.5mm stereo jack socket on the Mic inputs of the CT-91 and CT-44.

If you have any questions regarding connection, E-mail me.

Download Instruction Sheet for this interface

2m cable not long enough? Use the 3m, 4m and 5m options below

Interface Performance Tests

My CAT Interfaces have been fully tested to ensure that they do not generate unwanted noise in your reciever and that they operate reliably at the highest baud rates supported by the tranceivers/receivers. Click on the image below to be directed to my interface performance page.

Click on the picture below to go to the interface performance page

Popular Yaesu CAT Interfaces
FT-100 FT-817 FT-847 FT-857 FT-897 FT-920 FT-1000 FT-1000MP FT-1000 Mk5 FT-2000